HXTW-5型 測溫探針
所屬分類:
公司產品廣泛應用于火電、冶金、化工、造紙、垃圾處理、硫化床鍋爐及其它余熱鍋爐。目前公司已是哈鍋、上鍋 、武鍋 、杭鍋、錫鍋、川鍋、濟鍋、蘇源環保、武漢凱迪等的合格分供方。為國內各大鍋爐廠配套300MW、600MW及1000MW機組電站鍋爐項目。產品業績遍布全國二十八個省、市、自治區,并出口印度、印尼、越南、泰國、馬來西亞等東南亞國家。
產品詳情
HXTW-5型 測溫探針是一種將熱電偶送入爐膛,監測爐膛煙氣溫度的機械裝置。熱電偶固定在探槍頭部,在煙氣中作伸縮運動,移動速度2.5米/分左右。測溫探針由一個1.1KW電機驅動,可近操、遠操和由DCS監控。
The HXTW-5 temperature probe is a mechanical device that sends thermocouples into the furnace to monitor the temperature of furnace flue gas. The thermocouple is fixed at the head of the probe gun and performs telescopic motion in the smoke, with a movement speed of about 2.5 meters per minute. The temperature probe is driven by a 1.1KW motor and can be operated remotely, remotely, and monitored by DCS.
鍋爐啟動期間,位于爐膛出口處的再熱器管束由于沒有循環蒸汽進行冷卻,其溫度可能達到甚至超過材料耐溫極限值。測溫探針作為鍋爐啟動時的煙溫監測裝置,用來連續測量該區域的溫度,避免了再熱器被燒壞的危險。
During boiler start-up, the temperature of the reheater tube bundle located at the furnace outlet may reach or even exceed the material temperature tolerance limit due to the lack of circulating steam for cooling. The temperature probe is used as a smoke temperature monitoring device during boiler startup to continuously measure the temperature of the area, avoiding the risk of reheater burnout.
測溫探針還可用來測量鍋爐低負荷運行時的煙氣溫度,作為輔助控制手段。
The temperature probe can also be used to measure the flue gas temperature during low load operation of the boiler, as an auxiliary control method.
主要技術參數
Main technical parameters
行程:按合同
Itinerary: according to the contract
測溫范圍:按合同
Temperature measurement range: according to the contract
熱電偶型號:WRGKK2--131--HBS5001IELB(L一熱電偶長度,MM)
Thermocouple model: WRGKK2-131-- HBS5001IELB (L - thermocouple length, MM)
探管材質:1Cr18Ni9Ti
Probe tube material: 1Cr18Ni9Ti
探管外徑:φ89
Outer diameter of probe tube: φ eighty-nine
探管移動速度:~2.5m/min
Moving speed of probe tube:~2.5m/min
位置顯示與信號輸出儀表參數(推薦):4~20mA 0~100%刻度
Position display and signal output instrument parameters (recommended): 4-20mA 0-100% scale
溫度顯示輸出儀表參數(推薦):4~20mA 0~800℃刻度或K分度
Temperature display output instrument parameters (recommended): 4-20mA, 0-800 ℃ scale or K-scale
電動機:Y90S--4B5型1.1KW ~1400r.p.m 380V 3P
Motor: Y90S-4B5 type 1.1KW~1400r. p.m 380V 3P
近似重量:~250k+每米行程115kg
Approximate weight:~250k+115kg per meter of travel
主要零部件
Main components
1.跑車與電動機(減速機)
1. Sports car and electric motor (reducer)
2.梁體
2. Beam body
3.墻箱(與鍋爐接口)
3. Wall box (interface with boiler)
4.動力電纜
4. Power cable
5.前托架(支撐探槍)
5. Front bracket (supporting probe gun)
6.探管與熱電偶探頭
6. Probe tube and thermocouple probe
7.電氣箱與行程控制(前、后限位開關)
7. Electrical box and travel control (front and rear limit switches)
8.溫度與控制系統
8. Temperature and Control System
9.位置顯示與信號輸出系統
9. Position display and signal output system
10.探管冷卻系統(選用)
10. Probe tube cooling system (optional)
公司產品廣泛應用于火電、冶金、化工、造紙、垃圾處理、硫化床鍋爐及其它余熱鍋爐。目前公司已是哈鍋、上鍋 、武鍋 、杭鍋、錫鍋、川鍋、濟鍋、蘇源環保、武漢凱迪等的合格分供方。為國內各大鍋爐廠配套300MW、600MW及1000MW機組電站鍋爐項目。產品業績遍布全國二十八個省、市、自治區,并出口印度、印尼、越南、泰國、馬來西亞等東南亞國家。
上一個:
下一個:
產品咨詢
相關產品